Filter
Top Products
PE Series Operator’s Manual
5
Getting Started
2.0 Before Using This Printer
Unpacking the Printer
The printer was carefully packaged to avoid any damage during
transit. Before opening, closely inspect the box for damages. In the
event of shipping damage, contact the carrier immediately regarding
it’s nature and extent.
In order to operate the printer you will need to remove the
packaging materials that are placed inside the printer for shipment.
Complete the following steps before connecting power. It may be
helpful to refer to Figure 2-2 when removing the packing material.
n Remove the printer from the box.
o Remove the printer from the plastic bag.
p Remove the tape that extends over the printhead assembly.
q Remove the piece of foam between the printhead and platen.
r Remove the tape that covers the J-Hook on the Ribbon
Take-Up Hub.
; Note: Save all packaging materials in the event that shipping the
printer is ever required.