PE Series Operator’s Manual
57
BQQMJDBUPS!CVTZ
System is waiting for control of the Print
Cycle from the applicator.
Printer applicator enable control may be
incorrectly configured. Verify setup;
see Section 4, Advanced Setup/PE
Options/PE Apply HW.
Possible defective applicator output
control.
Possible defective printer applicator
port.
DPWFS!PQFO!GBVM
U
The cover interlock switch is open.
Verify that the cover has been closed
completely.
Interlock switch may be defective or out
of adjustment; call for service.
IFBE!VQ!GBVMU
The printhead interlock switch is open.
Verify that the printhead Head-Lift
Lever has been locked down completely
into the stand-off.
Interlock switch may be defective or out
of adjustment; call for service.