Filter
Top Products
PE Series Operator’s Manual
22
3.7 Configuration Label Explanation
February 17, 1998 14:13 048 - Printer date and time, including Julian
calendar date.
Database Information--Includes serial number, security setting,
firmware version, ROM Checksums, and the amount of DRAM. Serial
Loopback Check and CTS/DTR Loopback Check results (if equipped
with the proper test plug, see Section 4, Figure 4-1).
Counter Information--Includes the absolute counter values (the total
amount of media through the printer, in inches) and the total number of
hours in operation.
Memory Configuration--Lists the amount of Printer memory allocated
for Internal Modules or Scaleable Fonts in 4 KB blocks.
Label Options--Lists label related settings.
PE Information--Specifies Printer model and the Low Ribbon Warning
setting.
Hardware--Lists the current readings of some Printer sensors.
Installed Options--Lists the Printer’s options.
PE Signaling--Lists the settings for applicator interfacing and backfeed
control.
Communication Options--Lists all communication settings including the
active port.
Operation--Indicates the operations that are available, and whether or not
they have been enabled.
Basic Functions--Lists the settings for the Basic Function Menu.
Compatibility--(PE 42 only) Changes the dots per inch.