Filter
Top Products
Replacing Parts 59
8 Turn the computer over, and remove the screws from the modem
cover.
9 Place your finger under the cover at the indentation and lift and slide
the cover open.
10 Remove the existing modem:
a Remove the screws securing the modem to the system board, and
set them aside.
b Pull straight up on the attached pull tab to lift the modem out of
its connector on the system board and disconnect the modem
cable.
11 Connect the modem cable to the modem.
NOTICE: The cable connectors are keyed for correct insertion; do not force
the connections.
12
Align the modem with the screw holes and press the modem into the
connector on the system board.
modem cable connector
modem cable