Filter
Top Products
64 Adding Parts
www.dell.com | support.dell.com
If you installed a controller card in step 11, attach the other end of the
interface cable to the controller card rather than to the system board.
14 Replace the front panel.
Fit the front panel’s two retaining hooks into their corresponding slots
on the computer (see page 59). Then, rotate the front panel toward
the computer until the front panel latches into position.
15 Make sure that no cable connections were loosened during the
procedure. Arrange cables so that they will not interfere with replacing
the power supply and computer cover.
16 Rotate the power supply back into place (see page 55).
17 Replace the computer cover (see page 71).
18 Plug your computer and devices into their electrical outlets, and turn
them on.
19 See the drive’s documentation for instructions on installing any
software required for drive operation.
cable
pin 1