Filter
Top Products
Adding Parts 65
CAUTION: Before you begin any of the procedures in this section,
follow the safety instructions on page 7.
CAUTION: To guard against electrical shock, always unplug your
computer from the electrical outlet before opening the cover.
To install a card:
1 Shut down the computer (see page 18).
2 Turn off any attached devices and disconnect them from their
electrical outlets.
NOTICE: To disconnect a network cable, first unplug the cable from your
computer and then unplug it from the network wall jack.
3
Disconnect the computer power cable from the wall outlet, and then
press the power button to ground the system board.
4 Remove the computer cover (see page 52).
5 Rotate the power supply (see page 53).
6 Unscrew and remove the filler bracket for the card slot you want to use.
filler bracket