Filter
Top Products
132 Configuring System Information
www.dell.com | support.dell.com
Modifying Remote Log Server Definitions
The
Remote Log Server Settings
page contains fields for viewing and configuring the available Log
Servers. In addition, new log servers can be defined, and the log severity sent to each server. To
open the
Remote Log Server Settings
page, click
System
→
Logs
→
Remote Server Settings
in the
tree view.
Figure 6-21. Remote Log Server Settings
The
Remote Log Server Settings
page
contains the following fields:
Available Servers
— Contains a list of servers to which logs can be sent.
UDP Port (1-65535)
— The UDP port to which the logs are sent for the selected server. The
possible range is 1 - 65535. The default value is 514.
Facility
— Defines a user-defined application from which system logs are sent to the remote server.
Only one facility can be assigned to a single server. If a second facility level is assigned, the first
facility level is overridden. All applications defined for a device utilize the same facility on a server.
The field default is Local 7. The possible field values are:
Local 0 - Local 7.
Description (0-64 Characters)
— The user-defined server description.
Delete Server
— Deletes the currently selected server from the Available Servers
list, when
selected.
The
Remote Log Server Settings
page also contains a severity list. The severity definitions are the
same as the severity definitions in the
Global Log Parameters
page.