Filter
Top Products
Configuring System Information 135
The following is an example of the CLI commands:
Defining IP Addressing
The
IP Addressing
page contains links for assigning interface and default gateway IP addresses, and
defining ARP and DHCP parameters for the interfaces. To open the
IP Addressing
page, click
System
→
IP Addressing
in the tree view.
Defining Default Gateways
The
Default Gateway
page contains fields for assigning Gateway to devices. Packets are forwarded
to the default IP when packets are sent to a remote network. The configured IP address must
belong to the same IP address subnet of one of the IP interfaces. To open the
Default Gateway
page, click
System
→
IP Addressing
→
Default Gateway
in the tree view.
console> enable
console# configure
console(config) # logging 10.1.1.1 severity critical
console(config)# end
console# show logging
Logging is enabled.
Console Logging: Level debug. Console Messages: 5 Dropped.
Buffer Logging: Level debug. Buffer Messages: 16 Logged, 16
Displayed, 200 Max.
File Logging: Level error. File Messages: 0 Logged, 209 Dropped.
SysLog server 31.1.1.2 Logging: error. Messages: 22 Dropped.
SysLog server 5.2.2.2 Logging: info. Messages: 0 Dropped.
SysLog server 10.2.2.2 Logging: critical. Messages: 21 Dropped.
SysLog server 10.1.1.1 Logging: critical. Messages: 0 Dropped.
1 messages were not logged
03-Mar-2004 12:02:03 :%LINK-I-Up: 1/e11
03-Mar-2004 12:02:01 :%LINK-W-Down: 1/e12
03-Mar-2004 12:02:01 :%LINK-I-Up: 1/e13