Filter
Top Products
Configuring System Information 183
Figure 6-53. TACACS+ Table
Removing a TACACS+ Server
1
Open the
TACACS+ Table
page.
2
Click
Show All
.
The
TACACS+ Table
opens:
3
Select a
TACACS+ Table
entry.
4
Select the
Remove
check box.
5
Click
Apply Changes
.
The TACACS+ server is removed, and the device is updated.
Defining TACACS+ Settings Using CLI Commands
The following table summarizes the equivalent CLI commands for setting fields displayed in
the
TACACS+ Settings
page.
Table 6-46. TACACS+ CLI Commands
CLI Command Description
tacacs-server host
{
ip-address
|
hostname
} [
single-connection
]
[
port
port-number
] [
timeout
timeout
] [
key
key-string
] [
source
source
] [
priority
priority
]
Indicates a TACACS+ host.
tacacs-server key
key-string
Indicates the authentication and encryption key for all
TACACS+ communications between the device and the
TACACS+ server. This key must match the encryption used
on the TACACS+ daemon. (Range: 0 - 128 characters.)
tacacs-server timeout
timeout
Indicates the timeout value in seconds. (Range: 1 - 30.)
tacacs-server source-ip
source
Indicates the source IP address. (Range: Valid IP Address.)
show tacacs
[
ip-address
] Displays configuration and statistics for a TACACS+ server.