Filter
Top Products
204 Configuring System Information
www.dell.com | support.dell.com
Deleting Communities
1
Open the
SNMPv1,2 Community
page.
2
Click
Show All
.
The
Community Table
page opens.
3
Select a community and check the
Remove
check box.
4
Click
Apply Changes
.
The community entry is deleted, and the device is updated.
Configuring Communities Using CLI Commands
The following table summarizes the equivalent CLI commands for viewing fields displayed in the
SNMPv1,2 Community
.
The following is an example of the CLI commands:
Table 6-52. SNMP Community CLI Commands
CLI Command Description
snmp-server community
community
[ro | rw |
su] [
ip-address
][view
view-name
]
Sets up the community access string to permit
access to the SNMP protocol.
snmp-server
community-group
community group-name
[
ip-address
]
Sets up community access string to permit
limited access to the SNMP protocol based on
group access rights.
show snmp Displays the current SNMP device
configuration.
Console (config)# snmp-server community dell ro 10.1.1.1