Filter
Top Products
Configuring System Information 187
3
Define the
fields.
4
Click
Apply Changes
.
The new RADIUS server is added, and the device is updated.
Displaying the RADIUS Server List:
1
Open the
RADIUS Settings
page.
2
Click
Show All
.
The
RADIUS Servers List
opens:
Figure 6-56. RADIUS Servers List
Removing a RADIUS Server
1
Open the
RADIUS Settings
page.
2
Click
Show All
.
The
RADIUS Servers List
opens.
3
Select a
RADIUS Servers List
entry.
4
Select the
Remove
check box.
5
Click
Apply Changes
.
The RADIUS server is removed, and the device is updated.
Defining RADIUS Servers Using CLI Commands
The following table summarizes the equivalent CLI commands for defining fields displayed on the
RADIUS Settings
page.
Table 6-47. RADIUS Server CLI Commands
CLI Command Description
radius-server timeout
timeout
Sets the interval for which a router waits for a
server host to reply.
radius-server
retransmit
retries
Specifies the number of times the software
searches the list of RADIUS server hosts.