Filter
Top Products
218 Configuring System Information
www.dell.com | support.dell.com
Activating Image Files
The
Active Images
page
allows network managers to select and reset the Image files. The Active
Image file for each unit in a stacking configuration can be individually selected. To open the
Active
Images
page
,
click
System
→
File Management
→
Active Images
in the tree view.
Figure 6-77. Active Images
The
Active Images
page
contains the following fields:
Unit No.
— The unit number for which the Image file is selected.
Active Image
— The Image file which is currently active on the unit.
After Reset
— The Image file which is active on the unit after the device is reset. The possible field
values are:
Image 1 — Activates Image file 1 after the device is reset.
Image 2
— Activates Image file 2 after the device is reset.
Selecting an Image File
1 Open the
Active Images
page
.
2 Select an Image file for a specific unit in the After Reset field.
3 Click Apply Changes.
The Image file is selected. The Image file reloads only after the next reset. The currently
selected Image file continue to run until the next device reset.