Filter
Top Products
344 Viewing Statistics
www.dell.com | support.dell.com
Displaying Etherlike Statistics for an Interface
1
Open the
Etherlike Statistics
page.
2
Select an interface in the
Interface
field.
Resetting Etherlike Statistics
1
Open the
Etherlike Statistics
page.
2
Click
Reset All Counters
.
The Etherlike Statistics counters are reset.
Viewing Etherlike Statistics Using the CLI Commands
The following table contains the CLI commands for viewing etherlike statistics.
The following is an example of the CLI commands.
Table 8-96. Etherlike Statistics CLI Commands
CLI Command Description
show interfaces counters
[ethernet
interface
| port-
channel
port-channel-number
]
Displays traffic seen by the physical
interface.
Console# show interfaces counters ethernet 1/1
Port IN Octets InUcastPkts InMcastPkts InBcastPkts
---- --------- ----------- ----------- -----------
1/e1 183892 1289 987 8
Port OUT Octets OutUcastPkts OutMcastPkts OutBcastPkts
---- ---------- ------------ ------------ ------------
1/e1 9188 9 8 0
FCS Errors: 8
Single Collision Frames: 0
Multiple Collision Frames: 0
SQE Test Errors: 0
Deferred Transmissions: 0
Late Collisions: 0