Filter
Top Products
Configuring System Information 215
Downloading Files Using CLI Commands
The following table summarizes the equivalent CLI commands for setting fields displayed in the
File Download from Server
page.
The following is an example of the CLI commands:
NOTE: Each exclamation mark (!) indicates that ten packets were successfully transferred.
Uploading Files
The
File Upload to Server
page contains fields for uploading the software to the TFTP server from
the device. The Image file can also be uploaded from the
File Upload to Server
page. To open the
File Upload to Server
page, click
System
→
File Management
→
File Upload
in the tree view.
Table 6-55. File Download CLI Commands
CLI Command Description
copy
source-url destination-url
Copies any file from a source to a destination.
console# copy tftp://10.6.6.64/pp.txt startup-config
....!
Copy: 575 bytes copied in 00:00:06 [hh:mm:ss]
01-Jan-2000 06:41:55 %COPY-W-TRAP: The copy operation was
completed successfully