Filter
Top Products
234 Configuring Switch Information
www.dell.com | support.dell.com
Enabling Multiple Hosts Using the CLI Commands
The following table summarizes the equivalent CLI commands for enabling the advanced port
based authentication as displayed in the
Multiple Hosts
page.
The following is an example of the CLI Command.
Table 7-62. Multiple Hosts CLI Commands
CLI Command Description
dot1x multiple-hosts
Allows multiple hosts (clients) on an 802.1X-
authorized port that has the dot1x port-control
interface configuration command set to auto.
dot1x single-host-violation
{forward
|
discard
|discard-shutdow
n}
[trap
second
s]
Configures the action to be taken when a station,
whose MAC address is not the client (supplicant)
MAC address, attempts to access the interface.
Console(config)# interface ethernet 1/e1
Console(config-if)# dot1x multiple-hosts