Filter
Top Products
support.dell.com Using the System Setup Program B-1
APPENDIX B
Using the System Setup Program
NOTICE: Dell recommends that you change the system setup program set-
tings only when absolutely necessary. Changing certain system device
settings could cause hardware conflicts.
You can use the system setup program to:
•
Change your system configuration information after you add, change, or remove
hardware connected to or installed inside your computer
•
Verify information about your current computer configuration, such as the amount
of system memory
•
Set or change selectable settings—for example, the system password
NOTE: When your computer is running the Microsoft
Windows 98
Second Edition operating system, certain
Control Panel
settings override system
setup program settings. For more information, see “Power Menu” found later in
this appendix.
Accessing the System Setup Program
NOTICE: To avoid data loss, save and close any open files and exit any
open application programs before you access the system setup program.
To access the system setup program, turn on the computer and press <F2> as soon
as you see the Dell logo.
NOTE: The computer restarts automatically when you exit the system setup program.
The system setup program includes the following menus on the main screen:
•
Main
•
System Devices
•
Security
•
Power
•
Boot
•
Exit
3959ubk1.book Page 1 Monday, March 20, 2000 4:52 PM