Filter
Top Products
5-6 Dell PowerEdge 6300 Systems User’s Guide
6WHS([DPLQH6ZLWFKHVRU3ULQW5HSRUW
The Step 3: Examine Switches or Print Report option lists the required switch and
jumper settings for each expansion card in your computer. To view the settings, high-
light the card and press <Enter>. Press <F7> to make a copy of or print the settings.
If your computer is attached to a printer, you can print out the information or copy it to
a file.
6WHS6DYHDQG([LW
The Step 4: Save and Exit option allows you to save or cancel the configuration
changes you have made. When you select this option, follow the directions on the
menu that appears.
If you save your changes
, the utility saves the new configuration in your system’s
NVRAM and in a file on your RCU diskette. Then, the utility automatically reboots your
system.
If you cancel your changes
, you can remain in the utility to make other changes or exit
the utility without saving any changes.
0DLQWDLQ6\VWHP&RQILJXUDWLRQ'LVNHWWH
Using the Maintain System Configuration Diskette option, you can create a backup
copy of the .sci file or use a previously saved .sci file to reconfigure your system or to
identically configure many other systems. You can also delete .sci files from your RCU
diskette or the configuration diskette(s) for any hardware option.
([LW)URP7KLV8WLOLW\
The Exit From This Utility option allows you to exit from the RCU and reboot your
computer system.
$GYDQFHG0HQX
The Advanced menu lets you lock or unlock cards in a configuration, view detailed
information about the system, and maintain .sci files.
To see the Advanced menu, press <F7> while in the Step 3: View or Edit Details
menu. The following menu appears:
Advanced menu
Lock/unlock boards
View additional system information menu
Set verification mode menu
Maintain SCI files menu
Highlight the menu category you want, and press <Enter>. Then follow the online
instructions.
The following subsections describe each category.