Filter
Top Products
106 Jumpers, Switches, and Connectors
www.dell.com | support.dell.com
System Board Jumpers
Figure A-2 shows the location of the configuration jumpers on the system board. Table A-1 lists the
jumpers settings.
Figure A-2. System Board Jumpers
Table A-1. System Board Jumper Settings
Jumper Setting Description
PASSWD (default) The password feature is enabled. You can set the password in
System Setup only when the password feature is enabled. See
your User’s Guide for information.
The password feature is disabled.
NVRAM_CLR (default) The configuration settings in NVRAM are retained at system
boot.
The configuration settings in NVRAM are cleared at next
system boot.
jumpered unjumpered
D3835bk0.book Page 106 Monday, August 24, 2009 4:34 PM