A SERVICE OF

logo

Installing Drives 81
Installing Drives
The hard-drive bays provide space for up to four SATA hard drives. The hard drives must be
connected to a CERC SATA RAID controller card or SATA daughter card.
Configuring the Boot Drive
The drive or device from which the system boots is determined by the boot order specified in the
System Setup program. See "Using the System Setup Program" in your
User's Guide
. To boot the
system from a hard drive or drive array, the drive(s) must be connected to the appropriate
controller.
Removing a Hard Drive
CAUTION: See your System Information Guide for complete information about safety precautions,
working inside the computer, and protecting against electrostatic discharge.
1
Remove the bezel. See "Removing and Replacing the Bezel" in "Troubleshooting Your
System."
2
Pull the release lever to the right and pull down the horizontal bar on the front of the carrier.
See Figure 7-1.
D3835bk0.book Page 81 Monday, August 24, 2009 4:34 PM