![](http://pdfasset.owneriq.net/e/bf/ebfcaf20-ab49-4ef7-b5bc-6e9343ae1078/ebfcaf20-ab49-4ef7-b5bc-6e9343ae1078-bgaa.png)
170 Adding and Replacing Parts
NOTE: Only GSM (HSDPA) type cards need a SIM. EVDO cards do not use a SIM.
1
Follow the procedures in "Before You Begin" on page 153.
2
In the battery bay, slide the SIM into the SIM compartment with the cut-
off corner of the SIM facing away from the compartment.
Wireless Mini-Cards
CAUTION: Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
NOTICE: To help prevent damage to the system board, you must remove the battery
from the battery bay before you begin working inside the computer.
1 battery bay 2 SIM
1
2