Filter
Top Products
80 Adding and Replacing Parts
www.dell.com | support.dell.com
9
Ground yourself and install the new memory module:
NOTE: If the memory module is not installed properly, the computer may not boot properly. No error
message indicates this failure.
a
Align the notch in the module edge connector with the tab in the connector slot.
NOTICE: Only hold the module by the shorter, notched ends. Do not push on the longer,
outer edge.
b
Holding the shorter, notched ends of the module, slide the edge of the module firmly into
the connector, and rotate the module down until you feel a click. If you do not feel the
click, remove the module and reinstall it.