Filter
Top Products
5. Remove the camera cable connector.
6. Remove the display panel.
7. Remove the six screws (three on each side) that secure the display panel brackets to the display panel.
Replacing the Display Panel
1. Replace the six screws that attach the display panel brackets to each side of the display panel.
2. Align the display panel with the display back and replace the four screws.
3. Connect the LCD camera cable to the display panel.
4. Route the cables back through their routing channels.
5. Replace the display bezel (see Replacing the Display Bezel).
Removing the Display Panel Cable
1. Remove the display assembly (see Removing the Display Assembly).
2. Remove the display bezel (see Removing the Display Bezel).
3. Remove the display panel (see Removing the Display Panel).
4. Turn over the display panel, placing it on a clean surface.
1
display panel
2
screws (4)
3
camera cable connector (optional)
4
display panel-cable connector
1
display panel bracket (1 left, 1 right)
2
screws (6 total; 3 each side)