Filter
Top Products
17. Lift the system board at an angle toward the side of the computer and out of the computer base.
Replacing the System Board
1. Follow all of the steps in Removing the System Board in reverse order.
2. Turn on the computer.
3. Insert the CD that accompanied the replacement system board into the appropriate drive. Follow the instructions that appear on the screen.
Back to Contents Page
1
speaker cable connector
2
power button cable connector
3
power button cable release tabs (2)
NOTICE: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in
damage to the computer.
NOTE: After you have replaced the system board, enter the computer Service Tag into the BIOS of the replacement system board.