Filter
Top Products
Back to Contents Page
Coin-Cell Battery
Dell™XPS™M1330ServiceManual
Removing the Coin-Cell Battery
Removing the Coin-Cell Battery
1. Follow the procedures in Before You Begin.
2. Turn the computer over.
3. Turn the computer over and loosen the three captive screws along with the M2.5 x 5-mm screw. Remove the module cover.
4. Disconnect the coin-cell battery cable from the system board.
5. Slide the coin-cell battery from under the antenna cables and remove the battery from the computer.
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as a connector on the back of the computer).
NOTICE: To help prevent damage to the system board, you must remove the battery from the battery bay before you begin working inside the
computer.
1
M2.5 x 5-mm screw
2
captive screws (3)
3
module cover
1
coin-cell battery
2
cable connector