Filter
Top Products
3. Ground yourself by touching one of the metal connectors on the back of the computer.
4. Remove the M2 x 3-mm securing screw.
5. Remove the FCM card.
Replacing the FCM Card
1. Insert the FCM card connector at a 45-degree angle into the system board connector labeled "FCM."
2. Press the other end of the FCM card down into the slot on the system board until the card clicks into place.
3. Replace the M2 x 3-mm securing screw.
Back to Contents Page
NOTE: If you leave the area, ground yourself again when you return to the computer.
1
FCM card
2
M2 x 3-mm securing screw
NOTICE: Install the FCM card in the WWAN or WPAN slot. Do not install an FCM cardin the WLAN card slot. Doing so may cause damage to your
computer.