Filter
Top Products
6. Remove the keyboard (see Keyboard).
7. Using your fingernail, pull the cable release tabs forward and remove the center control cover cable.
Replacing the Hinge Covers and Center Control Cover
1. Reconnect the cable that attaches the center control cover to the system board, and snap the center control cover in place.
2. Replace the keyboard (see Replacing the Keyboard).
3. Replace the hinge covers.
4. Turn the computer over and replace the two M2 x 3-mm screws that secure the center control cover to the computer base.
Back to Contents Page
1
center control cover
1
cable release tabs (2)
2
center control cover cable