Filter
Top Products
Back to Contents Page
Optical Drive
Dell™XPS™M1330ServiceManual
1. Follow the procedures in Before You Begin.
2. Remove the hinge covers and center control cover (see Hinge Covers and Center Control Cover).
3. Remove the keyboard (see Keyboard).
4. Remove the display assembly (see Display Assembly).
5. Remove the palm rest (see Palm Rest).
6. Remove the four M2 x 3-mm screws that secure the optical drive to the computer base.
7. Lift the drive out of the computer base and remove the connector from the back of the drive.
Back to Contents Page
CAUTION: Before performing the following procedures, follow the safety instructions in the Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching a connector on the back panel of
the computer.
1
M2 x 3-mm screws (4)
2
optical drive