Filter
Top Products
Dell™ PowerEdge™ R610 Technical Guidebook
10
G. Side Views and Features
Rack installation components such as rails are provided with the PowerEdge R610 Rack Kit. The rack
installation components are as follows: sliding rack mount with latest generation Cable Management
Arm (CMA). The PowerEdge R610 will feature slam latches to oer easier removal from the rack. When
the system is installed in a rack, please observe the following guideline:
When the system is installed in a rack, only Dell-approved CMAs should be installed behind the chassis.
Rails
•Enable the replacement of thumbscrews with slam latches on the chassis for easier stowing in
the rack.
•Include the new, simple, and intuitive ReadyRail™ tool-less rack interface for square-hole and
round-hole racks.
•Provide significantly improved compatibility with non-Dell racks.
•Static rails for the R610 & R710 fit in all types of four-post and two-post racks available in the
industry including four-post threaded hole racks.
CMAs
•Provide much larger vent pattern for improved airflow through the CMA.
•Include a common support tray for eliminating CMA sag.
•Replaced tie wraps with hook and loop straps to eliminate risk of cable damage during cycling.
•Maintain key feature of being fully reversible with no conversion required.
H. Rails and Cable Management