Dell R610 Server User Manual


  Open as PDF
of 56
 
Dell™ PowerEdge™ R610 Technical Guidebook
42
SECTION 15. RACK INFORMATION
A. Overview / Description
Rack installation components such as rails are provided with the PowerEdge R610 Rack Kit. The rack
installation components are as follows: sliding rack mount with latest generation Cable Management
Arm (CMA). The PowerEdge R610 will feature slam latches to oer easier removal from the rack. When
the system is installed in a rack, please observe the following guidelines:
Nothing should be located within 12” of the front of the unit that would restrict the airflow into the
system.
Nothing should be mounted or placed behind the chassis that would restrict airflow from exiting the
system.OnlyDell-approvedCMAscanbeplacedbehindthechassis.Allotherobjectsshouldbelocated
at least 24” away from the rear of the chassis.
When two systems are placed back to back, the separation between the units should be at least 24” if
the exit airflow is equivalent for the two chassis. This will allow the exit air to escape without creating an
extreme back pressure at the rear of one of the chassis.
B. Cable Management Arm (CMA)
Notes:•CMAsupportsforthemaximumnumberofcablessupportedbysystem
•Thenumbersinthismatrixrepresentthenumberandtypesofexternalcablesrequiredtobe
supported by the CMA solution.
•Thismatrixisbuiltonthepracticalworstcasecongurationineachplatformbasedonprior
andprojectedtakerates.Notethatothercombinationsofadaptersandassociatedcablesexist,
but are assumed to fall within these guidelines from the standpoint of bend radius and
flexibility, cable bundling, cable volume, etc.
•PCINICcablesareassumedtobeEthernet.
•KVMcabledonglemaybeusedformouse/keyboard/video.
CABLE TYPE NUMBER OF CABLES
Mouse – USB 1
Keyboard – USB 1
Video – VGA 1
Power Cords 2
LOMs – Ethernet 1
PCI NICs 1
Total 7
 previous next