Filter
Top Products
NOTE: It is recommended that you always use a static mat and static strap while working on components in the
interior of the system.
1. Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet and
peripherals.
2. Lay the system on its side.
3. Remove the screw securing the left side cover at the left front bottom of the chassis.
4. Remove the three screws securing the left side cover at the back end of the chassis.
5. Gently dislocate the cover by pushing up the cover from the bottom.
6. Remove the cover away from the system.
Figure 62. Removing and Installing the System Left Side Cover
1. left side cover
2. bottom screw
3. screws (3)
Installing The System Left Side Cover
NOTE: It is recommended that you always use a static mat and static strap while working on components in the
interior of the system.
1. Replace the system top cover. See Installing The System Top Cover.
2. Slightly offset the left side cover toward the top of the system so that the tabs on the side cover align with the slots
on the bottom of the chassis.
3. Secure the left side cover onto the chassis using the screws.
Control Panel
115