Filter
Top Products
Item Indicator, Button, or
Connector
Icon Description
1 PCIe expansion card slots
(4) (processor 1)
Allows you to connect up to two PCI Express expansion
cards and two PERC cards.
2, 3 Ethernet connectors
Two integrated 10/100/1000 Mbps NIC connectors.
4 System identification button The identification buttons on the front and back panels
can be used to locate a particular system within a rack.
When one of these buttons is pressed, the LCD panel on
the front and the system status indicator on the back flash
until one of the buttons is pressed again.
Press to toggle the system ID on and off.
If the system stops responding during POST, press and
hold the system ID button for more than five seconds to
enter the BIOS progress mode.
To reset iDRAC (if not disabled in F2 iDRAC setup), press
and hold for more than 15 seconds.
5 System identification
connector
Allows you to connect the optional system status indicator
assembly through the optional cable management arm.
6 iDRAC Enterprise port Dedicated management port.
NOTE: The port is available for use only if the iDRAC
Enterprise license is installed on your system.
7 Power supply (PSU1)
AC 495 W, 750 W, or 1100 W
or
DC 1100 W
8 USB connectors (6) Allows you to connect USB devices to the system. The
ports are USB 2.0-compliant.
9 Video connector Allows you to connect a VGA display to the system.
10 Serial connector Allows you to connect a serial device to the system.
11 Power supply (PSU2)
AC 495 W, 750 W, or 1100 W
or
DC 1100 W
12 PCIe expansion card slots
full height (3) (processor 2)
Connects up to three full-height PCI Express expansion
cards.
18