Filter
Top Products
Bezel Blank
Removing The Bezel Blank
CAUTION: Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your
warranty. Read and follow the safety instructions that came with the product.
1. If installed, remove the front bezel.
2. Open the system.
3. Identify the bezel blank to be removed and push the metal tab to disengage the blank from the slot in the chassis.
NOTE: The metal tab is visible on the right side of the open system in the tower mode.
4. Pull the bezel blank out and away from the chassis.
Figure 15. Removing and Installing the Bezel Blank
1. bezel blank
2. metal tab
45