Filter
Top Products
16. Install the LCD module. See Installing The LCD Module—Rack Mode.
17. Attach the mylar to cover the openings on the chassis where the system rear feet were installed in the tower mode.
See figure for more information.
Figure 72. Attaching the Mylar Cover
1. marking on chassis
2. mylar cover
18. Install the system left side cover.
19. Close the system.
20. Install the rack ears.
21. To attach the rack ears, follow the steps below:
a) Align the three screw holes on the right rack ear with the screw holes on the right side of the rack system.
b) Install the three screws using a #2 Phillips screwdriver.
c) Repeat step a and step b to install the left rack ear.
131