Filter
Top Products
Menu Item Description
When In-System Characterization (ISC) is set to
enabled, ISC is executed during POST on detecting
relevant change(s) in the system configuration.
This helps in optimizing the system power and
performance. ISC takes about 20 seconds to be
executed, and system reset is required for ISC
results to be applied. The Enabled - No Reboot
option executes ISC and continues without
applying ISC results until the next time system
reset occurs. The Enabled option executes ISC and
forces an immediate system reset so that ISC
results can be applied. It takes the system longer to
be ready due to the forced system reset. When
disabled, ISC is not executed.
About Boot Manager
Boot Manager enables you to add, delete, and arrange boot options. You can also access System Setup
and boot options without restarting the system.
Entering Boot Manager
The Boot Manager screen enables you to select boot options and diagnostic utilities.
1. Turn on, or restart your system.
2. Press F11 when you see the message F11 = Boot Manager.
If your operating system begins to load before you press F11, allow the system to finish booting, and
then restart your system and try again.
Boot Manager main menu
Menu Item Description
Continue Normal Boot The system attempts to boot to devices starting
with the first item in the boot order. If the boot
attempt fails, the system continues with the next
item in the boot order until the boot is successful
or no more boot options are found.
One Shot Boot Menu Takes you to the boot menu, where you can select
a one time boot device to boot from.
Launch System Setup Enables you to access System Setup.
Launch Lifecycle Controller Exits the Boot Manager and invokes the Lifecycle
Controller program.
42