Filter
Top Products
– On the x16 PCIe Generation 3 interfaces available on slots 1, 3, 6, and 7.
– On systems that support one 5.25-inch removable media storage devices.
– On systems with six fan configuration.
– On systems that have 1100 W and 1600 W power supply.
NOTE: When you have more than two GPU cards on your system, you will need two 1100 W
PSUs installed on your system.
Removing a GPU card
Prerequisites
1. Ensure that you read the Safety instructions.
2. Follow the procedure listed in Before working inside your system.
3. Remove the cooling shroud.
4. Remove the expansion card holder.
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
Steps
1. Disconnect the cables from the GPU card.
CAUTION: Do not use excessive force when removing the cables as it can damage the
connectors.
2. Open the two expansion card latches by pressing the latch and then pushing the latch toward the
rear.
3. Hold the card by its edge, pull the card up to remove it from the card connector and the system.
92