Filter
Top Products
3. Rotate the system feet inward.
4. Lay the system on its side on a flat, stable surface.
Steps
Remove the screws securing the system feet to the base of the tower.
Figure 9. Removing and installing the system feet
1. screw hole (4) 2. slot (12)
3. tab (12) 4. base of the tower
5. system feet (4) 6. screw (4)
Installing the system feet
Prerequisites
CAUTION: Installing the feet on a stand-alone tower system is necessary to provide a stable
foundation for the system. Failure to install the feet poses the risk of having the system tip over,
possibly causing bodily injury or damage to the system.
1. Ensure that you read the Safety instructions.
2. Keep the #2 Phillips screwdriver ready.
3. Lay the system on its side on a flat, stable surface.
48