Filter
Top Products
Removing and Installing Parts 65
Back View
7
11
9
2
1
3
13
12
15
16
5
17
19
8
6
14
4
10
18
1
processor fans (2) For optimal cooling, two processor fans are provided. Do not block the vents.
2
cover latch release
To open the computer, lay the computer on its side with the cover latch release at the
top and then push the latch to the left. See "Opening the Computer Cover" on
page 67.
3
network adapter connector To attach your computer to a network or broadband device, connect one end of a
network cable to either a network jack or to your network or broadband device. Connect
the other end of the network cable to the network adapter connector on the back panel
of your computer. A click indicates that the network cable has been securely attached.
NOTE: Do not plug a telephone cable into the network connector.
On computers with a network connector card, use the connector on the card.
It is recommended that you use Category 5 wiring and connectors for your network. If
you must use Category 3 wiring, force the network speed to 10 Mbps to ensure reliable
operation.
network or
broadband jack