Filter
Top Products
86 Removing and Installing Parts
www.dell.com | support.dell.com
4
Install the hard drive into the computer by gently sliding the drive into place until the tabs
securely click into position.
NOTE: If you are installing a hard drive in the lower bay, place the drive in the bay so that the power
connector is on the left-hand side (opposite of the top hard drive)
.
5
Connect a power cable to the drive.
6
Connect the hard-drive cable to the drive and to the system board (see page 69).
7
Check all connectors to be certain that they are properly cabled and firmly seated.
drive
screws (4)
bracket rails (2)
hard drive
hard-drive cable
power cable
tabs (2)
system board connector