Filter
Top Products
DI-206 ISDN Remote Router
95
3.
Verify with your network administrator that the IP address and the IP subnet mask
configured in the
Network Configuration
,
IP Configuration, IP Stack
Configuration, LAN
submenu of the console program are valid for that LAN.
4.
Check the physical Ethernet cable, and make sure the connections on the router
and the hub or station are secure.
5.
Check to make sure an end station IS NOT connected to the Uplink port or that a
hub IS connected to the Uplink port using straight-through cables.
6.
Check to make sure the wires in the cable are attached to the appropriate pins in
the RJ-45 connector