D-Link DI-206 Network Router User Manual


 
DI-206 ISDN Remote Router
46
from your network. It is necessary to have good knowledge of IP protocol before
effectively configuring this filter.
Select an entry above and then press <Enter>. The following screen appears:
The IP Filter parameters are described below:
Name –
This is a 12 character (maximum), alphanumeric, user-defined name,
used to identify the filter.
Direction –
This defines the direction of the packet relative to the Interface
parameter below.
State –
This is used to define the routing decision applied to the packet. The three
routing decisions are described:
1.
forward
This allows the routing of the packet, if it has met the criteria of
the corresponding filter.