D-Link DI-206 Network Router User Manual


 
DI-206 ISDN Remote Router
81
This is the same Software Update configuration information contained in the
Software Update
section in the “
PROM System Configuration”
chapter. The
parameters are described in that section.
Perform a System Restart
after configuring these settings begins the software update
procedure.
System Restart
The system restart function enables you to reset the DI-206 without powering off.
Some setting changes require a system restart in order for them to take effect.
A system restart will not affect the router’s settings, but will clear all tables
including the routing table and all SNMP counters and tables. It is also used to
initiate a software update.