D-Link DI-206 Network Router User Manual


 
DI-206 ISDN Remote Router
57
Dynamic NAPT
This screen (below) is how the NAT IP Pool appears, if Dynamic NAPT was chosen
for the Translation Mode parameter. Each entry, in this configuration, can be used to
map a single global address and multiple, contiguous local addresses to each other.
All of the parameters are the same as in Dynamic NAT, except the Global IP is a
solitary, global address.
Global IP
– This is a single, globally unique IP Address of the global interface
(the interface to which it is assigned, in this case, one of the ISDN interfaces) that
is valid on the Internet.
Static NAT
This screen (below) is how the NAT IP Pool appears, if Static NAT
was chosen for
the Translation Mode parameter. Each entry in this configuration is used to map a
single global IP address a single local IP address.