D-Link DI-206 Network Router User Manual


 
DI-206 ISDN Remote Router
70
Rx Bytes –
The total number of bytes contained in packets received by the router.
Rx Unknown Packets –
The number of packets received by the router that were
of an unsupported protocol.
Rx Discard Packets –
The number of packets dropped by the router.
Rx Error Packets –
The number of invalid packets received by the router. This
hardware counter shows the sum of NOA, Abort, CRC, Overrun, CD Lost,
Framing and Parity error packets.
Rx NOA Packets –
Non-Octet Alignment. This counts the number of packets
received by the router that did not end on a byte boundary. The receipt of a
misaligned packet will generate a single NOA event regardless of the number of
misaligned octets in the packet.
Rx Abort Packet –
The number of packets that were dropped due to user
generated breaks in the transmission that occurred while a packet is being
received.
Rx CRC Packets –
The number of packets received that failed the CRC
checksum test.
Rx Overrun Packets –
The number of packets received that exceed the 1518
octet maximum length imposed on Ethernet packets. Overrun packets are
generated by some proprietary software applications.
Rx CD Lost Packets –
Carrier Detect Lost. This counts the number of Carrier
Detect packets that were lost by the router.
Rx Framing Error Packets –
Packets with framing errors can occur on the
ISDN port only when using HDLC in sync mode. This parameter counts the
number of lost start/stop flags.
Rx Parity Error –
The number of times parity errors occurred on the line.
Runtime Tables
The
Runtime Tables
submenu features
IP Routing Table, ARP Table
, and
PPP
Table
: