D-Link DI-206 Network Router User Manual


 
DI-206 ISDN Remote Router
62
Host Table
The host table allows the router to recognize host names on the network. Up to eight
host names can be entered in the table. Your network servers, especially your mail
server should be defined here. Leftover places in the table can be assigned to
individual hosts to speed up routing.
In the example below, the host name “ctsnow” is combined with the domain name
defined in the
DNS Configuration
submenu above (in this case, “dlink.com”) to
produce “ctsnow.dlink.com”. The mapping in the example of “ctsnow.dlink.com” to
the IP Address of 11.1.1.3 is only valid for computers which set the DI-206 router as
their DNS server.
Items are described as follows:
IP –
The IP address for the host.
Host Name –
The host name used by the host.
State –
Enables or disables entry.