D-Link PM0599-03 Network Router User Manual


 
COPYRIGHT © 2006 MERIT INDUSTRIES, INC.
Procedure
Generally, all router setup can be done from just one router setup screen. Touch the WAN
button on the left side of the router Home setup screen to display the WAN Settings page.
Chances are your configuration will be one of the three primary router setup configurations:
Dynamic IP, PPPoE, or Static IP. Your specific type of configuration will require different
information, all of which your broadband installer should have left at the location after
installing the broadband line.
Dynamic IP – (Used by most cable modems) See Figure 2-6.
NOTE:
The jukebox screen will only show a small portion of the router setup
screen. To see the bottom portion of the screen, use the scroll bar
on the right side of the screen.
FIGURE 2-6 - DYNAMIC IP ADDRESS EXAMPLE SCREEN
23 MOD BOX INSTALLATION & OWNER’S MANUAL PM0599-03