Filter
Top Products
COPYRIGHT © 2006 MERIT INDUSTRIES, INC.
Hard or Non-Absorbent Rooms
Rooms that are paneled and have bare or tiled floors are considered to be “hard or nonabsor-
bent.”
1. Turn all seven right channel and seven left channel graphic equalizer controls fully
counterclockwise.
2. Turn the 15.8 kHz control all the way clockwise.
3. Turn the 10.8 kHz control to the position midway between the maximum and mini-
mum position. Leave the 46 Hz, 108 Hz, 343 Hz, 1.08 kHz, and 3.43 kHz controls
turned all the way counterclockwise.
4. Play a selection and turn the controls slightly (no more than 1/8 of a turn at a time)
until the sound is acceptable. Be sure that the jukebox volume is adequate. If the
volume is not adequate, you will need to turn each control up (counterclockwise)
slightly until the volume is satisfactory.
35 MOD BOX INSTALLATION & OWNER’S MANUAL PM0599-03
Soft and Highly Absorbent Rooms
Rooms with carpet and drapery are considered to be “soft and highly absorbent.”
1. Turn all seven right channel and seven left channel graphic equalizer controls fully
counterclockwise.
2. Turn the 46 and the 108 Hz controls to the position midway between the maximum
and the minimum position. Leave all of the other controls turned all the way counter-
clockwise.
3. Play a selection and turn the controls slightly (no more than 1/8 of a turn at a time)
until the sound is acceptable. Be sure that the jukebox volume is adequate. If the
volume is not adequate, turn each control up (counterclockwise) slightly until the
volume is satisfactory.
Average or Moderately Absorbent Rooms
These are the factory settings.
1. Turn all seven right channel and seven left channel graphic equalizer controls fully
counterclockwise.
2. Play a selection and turn the controls slightly (no more than 1/8 of a turn at a time)
until the sound is acceptable. Be sure that the jukebox volume is adequate. If the
volume is not adequate, you will need to turn each control up (counterclockwise)
slightly until the volume is satisfactory.