Filter
Top Products
COPYRIGHT © 2006 MERIT INDUSTRIES, INC.
NOTE:
Every time a new hard drive is installed, the touch screen should
be calibrated.
TESTING THE UNIT
Once the jukebox is powered on and the user interface is running (see Figure 3-7), try the
following procedures before moving and installing the unit at the venue:
Peripherals
TOUCH SCREEN
FIGURE 3-5 - COMMUNICATION
CONTROLLER - CALIBRATE LOCATION
FIGURE 3-6 - CALIBRATION
SCREEN
The following procedure describes how to calibrate the touch screen:
1. Press the “Calibrate” button on the Communication Controller (see Figure 3-5).
Press the button in once to launch the calibration program. This will override the
application while the program runs. See Figure 3-6 for a picture of the calibration
program interface.
2. Close the jukebox top door and make sure it is locked.
3. Follow the directions on the screen, touching the center of the targets, then touch-
ing “YES”.
BILL ACCEPTOR
Insert a dollar bill in the jukebox and check that the increment in credits available corre-
sponds with the pricing scheme for the jukebox.
PM0599-03 MOD BOX INSTALLATION & OWNER’S MANUAL 30
Calibrate
TB1
P6
P7
P9
P5
P8
P10
POWER OUT
P23
P14
POWER IN
POWER IN
12 VDC
24 VDC
24 VAC
5 VDC
RS232
P22
CC RL RX
CC RL TX
P21
COIN
ACCEPTOR
P20
COIN
SWITCHES
P19
BILL
ACCEPTOR
POWERCALIBRATESERVICE
REJECT
COMMUNICATION
CONTROLLER
P3
AMP MUTE
P11
IR DETECTOR
P12
SW'S
P17
P18
COUNTER
MDB
BILL
ACC.
POWER
P16
CRDT STATUS
KID RL TX
CRDT RL TX
IR RCV
1000 W
250 W
P15
REJECT
P4
FAN CKTS
P2
VIDEO SW