Draytek 2130 Network Router User Manual


 
Vigor2130 Series User’s Guide
96
Gateway IP Address Type the gateway IP address.
Primary DNS Server Type in the primary IP address for the router if you want to use
Static IP mode.
Secondary DNS Server Type in secondary IP address for using in the future if
necessary.
Clone MAC Address It is available when the box of Enable is checked. Click Clone
MAC Address. The result will be displayed in the field of
MAC Address.
After finishing all the settings here, please click OK to activate them.
D
D
H
H
C
C
P
P
DHCP allows a user to obtain an IP address automatically from a DHCP server on the Internet.
If you choose DHCP mode, the DHCP server of your ISP will assign a dynamic IP address for
your router automatically. It is not necessary for you to assign any setting,
Router Name Type in a name for the router. It must be the same as the name
used in Syslog.
Clone MAC Address It is available when the box of Enable is checked. Click Clone
MAC Address. The result will be displayed in the field of
MAC Address.
After finishing all the settings here, please click OK to activate them.
P
P
P
P
P
P
o
o
E
E
To choose PPPoE as the accessing protocol of the internet, please select PPPoE from the
Internet Access menu. The following web page will be shown.