Draytek 2130 Network Router User Manual


 
Vigor2130 Series User’s Guide
74
WPA Algorithm Select TKIP, AES or auto as the algorithm for WPA.
WPA Pre-Shared Key Either 8~63 ASCII characters, such as 012345678..(or 64
Hexadecimal digits leading by 0x, such as
"0x321253abcde...").
z WPA-RADIUS
The built-in RADIUS client feature enables the router to assist the remote dial-in user or
a wireless station and the RADIUS server in performing mutual authentication. It enables
centralized remote access authentication for network management.
Type The WPA encrypts each frame transmitted from the radio
using the key, which either PSK (Pre-Shared Key) entered
manually in this field below or automatically negotiated
via 802.1x authentication. Select WPA, WPA2 or Auto as
WPA mode.
WPA Algorithm Choose the WPA algorithm, TKIP, AES or Auto.
Server IP Address Enter the IP address of RADIUS server.
Destination Port The UDP port number that the RADIUS server is using.
The default value is 1812, based on RFC 2138.
Shared Secret The RADIUS server and client share a secret that is used
to authenticate the messages sent between them. Both
sides must be configured to use the same shared secret.
z WPS
WPS (Wi-Fi Protected Setup) provides easy procedure to make network connection
between wireless station and wireless access point (vigor router) with the encryption
of WPA and WPA2.