Filter
Top Products
VigorSwitch P2260 User’s Guide
62
2
2
.
.
9
9
.
.
3
3
S
S
t
t
a
a
t
t
i
i
c
c
F
F
o
o
r
r
w
w
a
a
r
r
d
d
Function Name:
Static MAC
Function Description:
The function of Static is used to configure MAC’s real manners inside of the switch. Three
kinds of manners including static, static with destination drop and static with source drop
are contained in this function.
As “static” is chosen, assign a MAC address to a specific port, all of the switch’s traffics
sent to this MAC address will be forwarded to this port.
As “static with destination drop” is chosen, the packet will be dropped if its DA is equal to
the value you set up. Due to this setting belongs to the global one, so, it may affect all
ports’ transmission of the packets.
As “static with source drop” is chosen, the packet will be dropped if its SA is equal to the
value you set up. Due to this setting belongs to the global one, so, it may affect all ports’
transmission of the packets.
Parameter description:
MAC: It is a six-byte long Ethernet hardware address and usually
expressed by hex and separated by hyphens. For example,
00 – 40 - C7 - D6 – 00 - 01
VID: VLAN identifier. This will be filled only when tagged
VLAN is applied. Valid range is 1 ~ 4094.
Queue: Set up the priority( 0~3) for the MAC.
Forwarding Rule Static - A MAC address is assigned to a specific port, all of
the switch’s traffics sent to this MAC address will be
forwarded to this port.
Static with Destination Drop - While the DA of the
incoming packets meets the value you set up, these packets
will be dropped.
Static with Source Drop - While the SA of the incoming
packets meets the value you set up, these packets will be